Figure 6.3 Installing the MegaRAID SCSI 320-0 Controller

Bracket Screw

32-Bit Slots (3.3 V)

64-Bit Slots (5 V)

6.2.5Step 5: Power Up

Replace the computer cover and reconnect the AC power cords. Turn power on to the host computer. Set up the power supplies so that the SCSI devices are powered up at the same time as or before the host computer. If the computer is powered up before a SCSI device, the device might not be recognized.

During boot, the MegaRAID SCSI 320-0 BIOS message appears:

MegaRAID SCSI 320-0 Disk Array Adapter BIOS Version x.xx date

Copyright (c) LSI Logic Corporation

Firmware Initializing... [ Scanning SCSI Device ...(etc.)... ]

6-6Hardware Installation

Copyright © 2002 by LSI Logic Corporation. All rights reserved.