Table 4.1 | Configuration Features (Cont.) | |
|
|
|
Specification |
| Feature |
|
| |
Online capacity expansion | Yes | |
|
| |
Hot spare support | Yes | |
|
| |
Flashable firmware | Yes | |
|
| |
Hot swap devices supported | Yes | |
|
| |
Yes | ||
|
| |
Mixed capacity hard disk drives | Yes | |
|
| |
Support for hard disk drives with | Yes | |
capacities of more than 8 Gbytes. |
| |
|
| |
Clustering support (Failover control) | No | |
|
| |
Online RAID level migration | Yes | |
|
| |
RAID remapping | Yes | |
|
| |
No reboot necessary after expansion | Yes | |
|
| |
More than 200 Qtags per physical drive | Yes | |
|
| |
Hardware clustering support on the | Yes | |
board |
|
|
|
| |
Yes | ||
|
|
|
4.4Array Performance Features
Table 4.2 lists the array performance features.
Table 4.2 | Array Performance Features | ||
|
|
| |
Specification |
| Feature | |
|
|
| |
Host data transfer rate | 533 | Mbytes/s | |
|
|
| |
Drive data transfer rate | 320 | Mbytes/s | |
|
|
| |
Stripe sizes |
| 2, 4, 8, 16, 32, 64, or 128 Kbytes | |
|
|
|
|
Array Performance Features |
Copyright © 2002 by LSI Logic Corporation. All rights reserved.