Acnodes PCH 5120

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909. 597.1939

All r ights reserv ed. Product descr iption and produ ct specific ations

are sub ject to c hange without not ice. For latest product in formation,

please visit Acnode s’ we b si te a t ww w.acnodes. com.

PCH 5120

12.1” industrial Panel PC

IP67 rated fully enclosure

ƒ LBA/Large Mode [Auto]

Use the LBA/Large Mode option to disable or enable BIOS to auto detects LBA (Logical Block Address-

ing). LBA is a method of addressing data on a disk drive. In LBA mode, the maximum drive capacity is 137

GB.

Disabled BIOS is prevented from using the LBA mode control on the specified channel.

Auto DEFAULT BIOS auto detects the LBA mode control on the specified channel.

ƒ Block (Multi Sector Transfer) [Auto]

Use the Block (Multi Sector Transfer) to disable or enable BIOS to auto detect if the device supports multi-

sector transfers.

Disabled BIOS is prevented from using Multi-Sector Transfer on the specified channel. The data

to and from the device occurs one sector at a time.

Auto DEFAULT BIOS auto detects Multi-Sector Transfer support on the drive on the specified chan

nel. If supported the data transfer to and from the device occurs multiple sectors at a

time.

ƒ PIO Mode [Auto]

Use the PIO Mode option to select the IDE PIO (Programmable I/O) mode program timing cycles between

the IDE drive and the programmable IDE controller. As the PIO mode increases, the cycle time decreases.

Auto DEFAULT BIOS auto detects the PIO mode. Use this value if the IDE diskdrive support cannot

be determined.

0 PIO mode 0 selected with a maximum transfer rate of 3.3 MB/s

1 PIO mode 1 selected with a maximum transfer rate of 5.2 MB/s

2 PIO mode 2 selected with a maximum transfer rate of 8.3 MB/s

3 PIO mode 3 selected with a maximum transfer rate of 11.1 MB/s

4 PIO mode 4 selected with a maximum transfer rate of 16.6 MB/s

(This setting generally works with all hard disk drives

manufactured after 1999. For other disk drives, such as IDE

CD-ROM drives, check the specifications of the drive.)

ƒ DMA Mode [Auto]

Use the DMA Mode BIOS selection to adjust the DMA mode options.

Auto DEFAULT BIOS auto detects the DMA mode. Use this value if the IDE disk drive support cannot

be determined.