Acnodes PCH 5120 - page 55

14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909. 597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are sub ject to c hange without not ice. For latest product in formation,
please visit Acnode s’ we b si te a t ww w.acnodes. com.
PCH 5120
12.1” industrial Panel PC
IP67 rated fully enclosure
10 Sec POST waits 10 seconds for the USB mass storage
device after the start unit command.
20 Sec DEFAULT POST waits 20 seconds for the USB mass storage
device after the start unit command.
30 Sec POST waits 30 seconds for the USB mass storage
device after the start unit command.
40 Sec POST waits 40 seconds for the USB mass storage
device after the start unit command.
ƒ Device ##
The Device## field lists the USB devices that are connected to the system.
ƒ Emulation Type [Auto]
Use the Emulation Type BIOS option to specify the type of emulation BIOS has to provide for the USB
device.
Auto DEFAULT BIOS auto-detects the current USB.
Floppy The USB device will be emulated as a floppy drive.
The device can be either A: or B: responding to
INT13h calls that return DL = 0 or DL = 1
respectively.
Forced FDD Allows a hard disk image to be connected as a
floppy image. This option works only for drives
formatted with FAT12, FAT16 or FAT32.
Hard Disk Allows the USB device to be emulated as hard disk
responding to INT13h calls that return DL values of
80h or above.
CDROM Assumes the CD-ROM is formatted as bootable
media. All the devices that support block sizes
greater than 512 bytes can only be booted using this
option.