Acnodes PCH 5120

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909. 597.1939

All r ights reserv ed. Product descr iption and produ ct specific ations

are sub ject to c hange without not ice. For latest product in formation,

please visit Acnode s’ we b si te a t ww w.acnodes. com.

PCH 5120

12.1” industrial Panel PC

IP67 rated fully enclosure

ƒ Redirection After BIOS POST [Always]

Use the Redirection After BIOS POST option to specify when console redirection should occur.

Disabled The console is not redirected after POST

Boot Loader Redirection is active during POST and during Boot Loader

Always DEFAULT Redirection is always active (Some OSes may not work if set to Always)

ƒ Terminal Type [ANSI]

Use the Terminal Type BIOS option to specify the remote terminal type.

ANSI DEFAULT The target terminal type is ANSI

VT100 The target terminal type is VT100

VT-UTF8 The target terminal type is VT-UTF8

ƒ VT-UTF8 Combo Key Support [Disabled]

Use the VT-UFT8 Combo Key Support option to enable additional keys that are not provided by VT100 for

the PC 101 keyboard.

The VT100 Terminal Definition is the standard convention used to configure and conduct emergency man-

agement tasks with UNIX-based servers. VT100 does not support all keys on the standard PC 101-key

layout, however. The VT-UTF8 convention makes available additional keys that are not provided by VT100

for the PC 101 keyboard.

Disabled DEFAULT Disables the VT-UTF8 terminal keys

Enabled Enables the VT-UTF8 combination key. Support for ANSI/VT100 terminals

ƒ Sredir Memory Display Delay [Disabled]

Use the Sredir Memory Display Delay option to select the delay before memory information is

displayed. Configuration options are listed below

ƒ No Delay DEFAULT

ƒ Delay 1 sec

ƒ Delay 2 sec

ƒ Delay 4 sec

5.3.7 USB CONFIGURATIONUse the USB Configuration menu (BIOS Menu 12) to read USB configuration informa-tion and configure the USB settings.