14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909. 597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are sub ject to c hange without not ice. For latest product in formation,
please visit Acnode s’ we b si te a t ww w.acnodes. com.
PCH 512012.1” industrial Panel PC
IP67 rated fully enclosure
ƒ Serial Port Number [COM1]
Use the Serial Port Number option allows to select the serial port used for remote ac-
cess.
COM1DEFAULT System is remotely accessed through COM1
COM2 System is remotely accessed through COM2
NOTE: Make sure the selected COM port is enabled through the Super I/O configura -
tion menu.
ƒ Base Address, IRQ [2F8h,3]
The Base Address, IRQ option cannot be configured and only shows the interrupt ad-
dress of the serial port listed above.
ƒ Serial Port Mode [115200 8,n,1]
Use the Serial Port Mode option to select baud rate through which the console redirec-
tion is made. The following configuration options are available
ƒ 115200 8,n,1 DEFAULT
ƒ 57600 8, n,1
ƒ 38400 8, n,1
ƒ 19200 8, n,1
ƒ 09600 8, n,1
NOTE:
Identical baud rate setting musts be set on the host (a management computer running a
terminal software) and the slave
ƒ Flow Control [None]
Use the Flow Control option to report the flow control method for the console redirec-
tion application.
None DEFAULT No control flow,
Hardware Hardware is set as the c onsole redirection
Software Software is set as the console redirection