Actiontec electronic DMP011000-01 user manual Dif, Optical Ports, Ethernet Port, Power Port

Actiontec Wireless Digital Media Player User Manual

S/P Dif, Optical Ports

The S/P Dif (Sony/Philips Digital Interface) port is used to connect the Player to a compatible S/P Dif audio receiver. The S/P Dif uses an RCA cable to connect, while the Optical port uses an optical cable.

Ethernet Port

The Ethernet port is used to connect the Player to a computer or hub/router using a crossover Ethernet cable. A crossover Ethernet cable must be used to connect the Player to a computer. A standard, straight-through Ethernet cable will not connect the Player to a computer.

Power Port

The Power port is used to connect the Player to a standard electrical outlet using the included Power cord.

Side Panel

On the left side panel of the Player (when viewing from the front) includes a PC Card slot, which is used to connect the wireless PC Card included with the Digital Media Player kit. To install the card, see chapter 2, “Setting up the Player.”

4