Troubleshooting 9
This chapter contains a list of problems that may be encountered while using the Broadband Router, and techniques to try and overcome the problem. Note that these techniques may not solve the problem (or problems).
Accessing the Router if Locked Out
If the Router’s connection is lost while making configuration changes, a setting that locks access to the MegaControl Panel may have inadvertantly been acti- vated. There are three common ways to lock access to the Router:
Scheduler If a schedule has been created that applies to the computer over the connection being used, the Router will not be accessible during the times set in the schedule. To regain access, either wait until the connection is scheduled to be active again, or restore the default settings to the Router.
LAN Firewall If the firewall setting for the local network is set to maximum, no computers from the network will be able to connect to the Router. To gain access, restore the default settings to the Router.
Access Control If the access control setting for the computer is set to block the computer, access to the Router will be denied. To gain access, restore the default settings to the Router.
Restoring the Router’s Default Settings
There are two ways to restore the Router’s default settings. The first is to use the tip of a ballpoint pen and depress the “Reset” button on the back of the Router for at least five seconds. The second is to access the Router’s MegaControl Panel and navigate to the “Advanced Settings” screen. Click on “Restore Defaults” and read the instructions
117
