Actiontec electronic RI408

Actiontec Broadband Router User Manual

Chapter 3 Configuring My Network Settings

4. If this rule will be active all the time, select “Always” from the “When should this

rule occur?” drop-down list. If the rule will only be active at certain times select

“Specify Schedule” and click Add. Then, add a schedule rule (for more details

about schedule rules, see the “Advanced Settings” chapter of this manual).

☞

Note: Make sure the Router’s date and time settings for your

time zone are set correctly.

5. Click Apply to save the changes. The Access Control screen will display a sum-

mary of the access control rule.

☞

Note: To block a service that is not included in the list select

“Specify Protocol” from the Protocol drop-down menu. The

“Edit Service” screen appears. Define the service, then click OK.

The service will then be automatically added to the top section of

the “Add Access Control Rule” screen, and will be selectable.

The user may disable an access control and the service made available without

having to remove the service from the Access Control table. This may be useful to

make the service available only temporarily, with the expectation that the restric-

tion will be reinstated later.

• To temporarily disable an access control clear the check box next to the ser-

vice name.

• To reinstate the restriction at a later time select the check box next to the

service name.

• To remove an access restriction from the Access Control table click the

Remove button for the service. The service will be removed from the Access

Control table.

☞

Note: When Web Filtering is enabled, HTTP services cannot be

blocked by access control.