Chapter 4 Using Network Connections

DNS Server

Domain Name System (DNS) is the method by which website or domain names are translated into IP addresses. Specify such an address manually, according to the information provided by the ISP.

To manually configure DNS server addresses, select Use the Following DNS Server Addresses. Specify up to two different DNS server addresses, one pri- mary, the other secondary.

IP Address Distribution

The “IP Address Distribution” section of the Configure Network (Home/Office) screen is used to configure the Router’s Dynamic Host Configuration Protocol (DHCP) server parameters. DHCP automatically assigns IP addresses to net- work devices. If enabled, make sure to configure the network devices as “DHCP Clients.” There are three options in this section: Disabled, DHCP Server, and DHCP Relay.

Disabled Select this option if statically assigning IP addresses to the network devices.

DHCP Server To set up the network bridge to function as a DHCP server:

1.Select DHCP Server.

2.Enter the IP address at which the Router starts issuing addresses in the “Start IP Address” text boxes. Since the Router’s default IP address is 192.168.1.1, the Start IP Address should be 192.168.1.2.

3.Enter the end of the IP address range used to automatically issue IP address- es in the “End IP Address” text boxes. The “maximum” IP address that can be entered here is 192.168.1.253.

4.Enter the subnet mask address in the “Subnet Mask” text boxes. The subnet mask determines which portion of a destination LAN IP address is the net- work portion, and which portion is the host portion.

5.If Windows Internet Naming Service (WINS) is being used, enter the WINS server address in the “WINS Server” text boxes.

29

Page 32
Image 32
Actiontec electronic RI408 user manual DNS Server, IP Address Distribution