Getting Started | SDR2-USB Configuration Guide rev 1.0 |
1.2 Before you start
Before you start, be sure you have the following items available:
•DataBridge SDR2-USB
•A 5-30VDC power supply
•RS-232 DB9 serial cable
•The device you wish to record from (serial data source)
1.3A quick guide to the DataBridge SDR2-USB
On the front of the SDR2-USB are the USB "A" socket, record button, and LED indicators. The SDR2-USB can be toggled in and out of record mode using the record button located on the front panel. The LED indicators show the SDR2-USB’s current recording status. The data indicator flashes when data is received and is used to verify data reception from your data source.
Record Button | Power Indicator |
| Record Indicator |
Fault Indicator
Data Indicator
Figure 1.1. SDR2-USB Front Panel Controls.
