Acumen manual Service and Support SDR2-USB Configuration Guide rev

Service and Support SDR2-USB Configuration Guide rev 1.0

Exception 4: Bad Boot Record

Occurs when the disk is completely unformatted or formatted for an unsupported file system.

Use format /FS:FAT from the Windows command prompt to ensure proper FAT formatting.

Exception 5: Hardware Error

Usually occurs when the SDR2-USB cannot reset the USB storage device. Try ejecting and reinserting the card or using a new card and contact Acumen if problem persists.

Exception 6: EEPROM Error

Rare hardware error. Contact Acumen to discuss repair or replacement.

Exception 7: Cache Error

Rare hardware error. Contact Acumen to discuss repair or replacement.

Exception 8: Buffer Error (firmware error)

Rare error that may occur in customized or beta firmware versions. Contact Acumen to report.

Exception 9: Tasking Error (firmware error)

Rare error that may occur in customized or beta firmware versions. Contact Acumen to report.

Exception 10: USB Error

The USB storage media has reported a fatal error to the SDR2-USB.

Reinsert/replace the media and contact Acumen if problem persists.

Exception 11: Directory Creation Error

Rare. The SDR2-USB cannot create the subdirectory files are to be recorded to. Try using a different directory name or reformatting the media.

Exception 12: FAT12 File System Detected

The SDR2-USB has determined that the USB media was formatted using the FAT12 file system, which is unsupported. Reformat the USB storage device using the /A:512 option (Windows 2000/XP) and retry.

28