Adaptec 1744, AHA-1740A, 1742A user manual 3. Boot Message With Error Detection Enabled, adaptec

adaptec AHA-1740A/1742A/1744

If Error if Device Not Found is enabled, through the EISA Con- figuration utility, then you will see a screen similar to the one shown below:

Adaptec AHA-1740 BIOS v1.34

Copyright 1991 Adaptec, Inc.

[Standard Mode]

Target 0	- QUANTUM		P40S 940-40-94XX - Drive C: (80h)
Target 1	-	Device not found!
Target 2	- CONNER		CP340 (40mb 3.5) - Drive D: (81h)
Target 3	-	Device not found!
Target 4	- CHINON		CD-ROM CDS-431
Target 5	-	Device not found!
Target 6	-	Device not found!

Figure 6-3. Boot Message With Error Detection Enabled

By default, removable media disk drives are not installed by the adapter BIOS. To have removable media installed by the adapter BIOS, select the fr option from the EISA Configuration utility. Generally, this should not be done. The adapter BIOS, in either operation mode, does not support the removing of media during system operation. If the media is removed while the system is operating data loss could occur. Removable media (under DOS) should be installed with Adaptec ASPI software.

❐

6-4