Adaptec SATA AND SCSI RAID CONTROLLERS - page 43

3-7
Installing the Driver
9To enable RAID management software and utilities, type the
following commands:
cd mount-point/openserv/arc/driver/aacraid/reloc/tmp/aacraid/scripts
cp ./aacaifd /usr/sbin
cp ./S98aacaifd /etc/rc2.d
chmod 755 /usr/sbin/aacaifd /etc/rc.d/S98aacaifd
Installing the Driver in an Existing OpenServer System
To install the driver in an existing operating system:
1Install and configure your Adaptec RAID controller and hard
drives, as described in Chapter2.
2Create the driver disk, as described on page 3-2. When finished,
remove the driver disk.
3Boot the server.
4Insert the driver floppy disk.
5To ru n t he insta llpkg utility, open a terminal window and type
the
installpkg command.
OpenServer reads the disk and performs the installation.
6Rebuild the kernel.
7Install the new kernel by typing
y when prompted to make it
the default kernel.
8Restart the computer.
9Add devices created on the RAID controller to the operating
system. For details, refer to your OpenServer documentation.
10 Insert and mount the Adaptec installation CD.
11 To enable RAID management software and utilities, type the
following commands:
cd mount-point/openserv/arc/driver/aacraid/reloc/tmp/aacraid/scripts
cp ./aacaifd /usr/sbin
cp ./S98aacaifd /etc/rc2.d
chmod 755 /usr/sbin/aacaifd /etc/rc.d/S98aacaifd