A-5
Adaptec RAID Configuration Utility (ARC)
Viewing Array Properties
To view the properties of an existing array:
1From the ACU main menu, select Manage Arrays.
2From the List of Arrays dialog box, select the array you want to
view, then press Enter.
To view properties related to the array’s physical disks:
–RAID0, 1, 5 (Single-Level Arrays)—View the Array
Properties dialog box.
–RAID10, 50 (Dual-Level Arrays)—Highlight the array
member you want to view, then press Enter to display the
second level. Press Enter again to display the physical disks
associated with the array.
Note: Failed drives are displayed in a different text color.
3Press Esc to return to the previous menu.
Making an Array Bootable
Notes:
■
If the controller is not a boot device, you can disable its
runtime BIOS. (For details, see the table on pageA-10.) When
the BIOS is disabled, it does not occupy any of the expansion
ROM region of the system’s memory map. In a system with
several expansion ROMs, disabling the BIOS may be helpful.
■
The controller always uses the lowest numbered array as its
bootable array. If you delete Array00, the next lowest
numbered array becomes the bootable array.
■You cannot make a non-00 array bootable while the array
is in a build/verify or rebuild process.
■You may need to change the system BIOS to modify the
boot order. For more information, refer to the system
documentation.