4-6
Installing and Starting Adaptec Storage Manager
6UnixWare Only—To start RAID Agent, type the following case-
sensitive command:
sh /opt/RaidMan/RaidAgnt.sh
When successful, a copyright message is displayed in the
terminal window.
If you want RAID Agent to run at startup all the time, add the
following line to the /etc/inittab and /etc/conf/init.d/kernel files:
nfra:12346:once:sh /opt/RaidMan/RaidAgnt.sh
Installing Storage Manager on NetWare
Notes:
■With NetWare, Storage Manager supports up to 16
Adaptec RAID controllers.
■
You need the latest Support Pack for your operating system
so you can run the supported Java Virtual Machine (JVM).
■You need JVM version 1.3 or later. To check your JVM
version, load JVM, type JAVA -VERSION.
■For the latest updates from Novell, visit www.novell.com.
To install Storage Manager:
1Insert the Adaptec installation CD.
2From the command prompt, type load cdrom and press Enter.
3From the command prompt, type:
RaidMan:\netware\manager\install
The installation program starts.
4Follow the instructions on the screen to complete the
installation.