GB
Some of the options described may not apply to this instrument. Please check the functions of the instrument you have purchased before proceeding.
RANGE
Models | Operating Range | Overrange | ||
2000P, 2020P, 2080P | 25mbar / 10” H2O |
| 350mbar / 140” H2O | |
2001P, 2021P, 2081P | 130mbar / 52” H2O |
| 1bar / 401” H2O | |
2002P, 2022P, 2082P | 2bar / 28 PSI |
| 4bar / 58 PSI | |
2003P, 2023P, 2083P | 7bar / 101.5 PSI |
| 10bar / 145 PSI | |
2024P, 2084P | External Transducer |
| - | |
2005P, 2025P, 2085P | 2bar absolute |
| 4bar | |
2026P, 2086P | 10bar / 145 PSI |
| 10.342bar / 150 PSI | |
|
|
|
| |
| FEATURES |
| ||
Models |
|
|
| Features |
2000P, 2001P, 2002P, 2003P, 2005P |
| Backlight, Out of Range, Zeroing, | ||
| Zeroing Absolute & Hold | |||
|
|
| ||
2020P, 2021P, 2022P, 2023P, 2024P, 2025P, 2026P |
| As above plus: Smoothing, Units of Pressure, | ||
| Rangelock & Max/Min | |||
|
|
| ||
|
|
| ||
2080P, 2081P, 2082P, 2083P, 2084P, 2085P, 2086P |
| As above plus: Manuallog and Autolog | ||
|
|
|
|
|
Particular care should be taken not to over pressure the device as this may rupture the sensor membrane. This is not covered by the manufacturers warranty.
NOTE: The differential/gauge instruments will only measure positive pressures i.e. positive pressure applied to the positive port, or negative pressure applied to the negative port.
INSTRUMENT APPLICATION
The range of 2000P instruments are suitable for gauge, differential, or absolute measurements over a wide range of pressures. They are not suitable for use with corrosive substances or cyclic hydrocarbons, e.g. motor oil, transmission fluid and freon.
To use the 2000P with these components, isolation must be provided in the form of a buffer, such as a mineral oil or dry air.
INSTRUMENT OPERATION
BATTERIES
Two AA or equivalent cells (not supplied). Follow instructions on reverse of instrument for fitting/replacement.
When 
symbol appears on display, replace batteries.
IP65/IP67 RATING
The waterproof rating for this product will not be maintained unless the screws holding the battery compartment are firmly tightened when inserting or replacing batteries.
ON - OFF
Press ON key for on and OFF key for off. Automatic
or MAX/MIN mode. If 
key is held when unit is switched on, automatic
