Document 50934 Rev B 5/15/00 PN 50934:B 45

Programming Reference Sheet Factory Default Settings

--- To enter Programming, press Mode: 7 7 6 4, Enter
❑00 ❑01 ❑02 ❑03 ❑04 ❑05 ❑06 ❑07 ❑08 ❑09 ❑10 ❑11 ❑12 ❑13 ❑14 ❑15
Addresses 00 to 15 store the Primary Phone Number. Enter 'F' to represent the end of the number.
❑16 Primary Comm Format:

(4+2 Standard 1800/2300).

❑17 ❑18 ❑19 ❑20 Primary Account Code.
❑21 ❑22 ❑23 ❑24 Primary 24-Hour Test Time.

0000 = 12:00 midnight.

❑25 Primary Number Test Time Interval. '0' for 24-hour.
❑26 ❑27 ❑28 ❑29 ❑30 ❑31 ❑32 ❑33 ❑34 ❑35 ❑36 ❑37 ❑38 ❑39 ❑40 ❑41
Addresses 26-41 store the Secondary Phone Number.

Enter 'F' to represent the end of the number.

❑42 Secondary Comm Format: (4+2 Standard 1800/2300).
❑43 ❑44 ❑45 ❑46 Secondary Account Code.
❑47 ❑48 ❑49 ❑50 Secondary 24-Hour Test Time.

0000 = 12:00 midnight.

❑51 Secondary Number Test Time Interval. '0' for 24-hour.
❑52 ❑53 Start Monitoring Address
❑54 ❑55 End Monitoring Address
❑56 ADT-UDACT Communication Selection. '0' for ADT-UDACT Communication disabled.
❑57 Backup Reporting. '0' for backup.
❑58 Touchtone/Rotary Select. '0' for Touchtone.
❑59 Make/Break Ratio. '0' for 67/33 make/break ratio.
❑60 Leave default of zero.
❑61 Leave default of zero.
❑62 AC Loss reporting delay. '1' for 6 hour time delay.
❑63 Host PANEL ID. '8' for Unimode 300/400.
❑64 ❑65 Loop Number. For Ademco Contact ID only. Loop number = '00',
❑66 ❑67 ❑68 Device/Zone Number for general reports. For Ademco Contact ID only. Device number = '000'.
FFFFF
A
0
0
FFFF
0
0
00
0
0
0
0
0
0
0
0
0
0
0
00
0
F
F
A
0
02
1
1
8
00
000
FFFFFFFFFF
F
F
FF
F
F
FF
F
F
F
0
0
0
0