Document 50934 Rev B 5/15/00 PN 50934:B 51
Appendix C: Point Assignments (ADT-MNNA)
Point No. Point Function Point No. Point Function Point No. Point Function
141 81
242 82
343 83
444 84
545 85
646 86
747 87
848 88
949 89
10 50 90
11 51 91
12 52 92
13 53 93
14 54 94
15 55 95
16 56 96
17 57 97
18 58 98
19 59 99
20 60 100
21 61 101
22 62 102
23 63 103
24 64 104
25 65 105
26 66 106
27 67 107
28 68 108
29 69 109
30 70 110
31 71 111
32 72 112
33 73 113
34 74 114
35 75 115
36 76 116
37 77 117
38 78 118
39 79 119
40 80 120

Note: Use the following charts to carefully identify the function of each point in the system. Take special precaution with any

supervisory points in the system. For the ADT-UDACT to report a supervisory point to the central station, both the FACP and the

ADT-UDACT must have the point programmed as supervisory. Failure to program the panel or ADT-UDACT correctly will result

in a fire alarm signal being transmitted to the central station. All points greater than 568 can only be transmitted as fire alarm

points. Use Type Mode (refer to Section 4.2 Type Mode) to match the function of points in the system for proper reporting.