ADTRAN 5045 system manual Navigating the Terminal Menu, Terminal Menu Window

Section 5 User Interface Guide TRACER 5045 System Manual

1.NAVIGATING THE TERMINAL MENU

The TRACER 5045 menu system can be accessed with a VT100 compatible terminal that is connected to the RS-232 port located on the back of the unit and set to 9600 bits per second, 8 data bits, 1 stop bit, and no parity. Flow control on the serial interface should be configured to NONE for proper operation. Once a terminal is connected, press <Ctrl + L> to refresh the current screen. If password access has been enabled, the ENTER PASSWORD message displays at the bottom of the TRACER 5045 System Status menu.

All TRACER 5045 systems are shipped factory default with password protection disabled.

Terminal Menu Window

The TRACER 5045 uses a series of menu pages and a single main menu page to access its many features. The main menu page (see Figure 1) provides a link to all available configuration/status pages.

After connecting a VT100 terminal to the TRACER 5045, press <Ctrl + L> to redraw the current screen.

Figure 1. Main Menu Screen

40 © 2003 ADTRAN, Inc. 612805045L1-1A