Appendix E: Terminal Mode Commands
One of the following key words must be used first:
info | Goes directly to ConÞguration/System Info menu. | |
hdsl | Goes directly to ConÞguration/WAN/HDSL menu. | |
ip | Goes directly to ConÞguration/IP menu. | |
ipx | Goes directly to ConÞguration/IPX menu. | |
bridge | Goes directly to ConÞguration/Bridge menu. | |
security | Goes directly to ConÞguration/Security menu. | |
ppp | Goes directly to ConÞguration/PPP ProÞle menu. | |
telnet | Goes directly to ConÞguration/Management/Telnet menu. | |
snmp | Goes directly to ConÞguration/Management/SNMP menu. | |
maint | Goes directly to ConÞguration/Management/Maint menu. | |
status | Goes directly to ConÞguration/Status menu. | |
test | Goes directly to ConÞguration/Test menu. | |
logs | Goes directly to ConÞguration/Logs menu. | |
util | Goes directly to ConÞguration/Utilities menu. | |
frame | Goes directly to ConÞguration/WAN/Frame Relay menu | |
Some examples are listed below: |
| |
telnet user 1 name ÒguestÓ | sets user name for Telnet user list entry 1 | |
|
| to “guest” |
test 2047 |
| starts 2047 test |
status ip 1 gateway | returns the gateway address for IP route | |
|
| table entry 1 |
106 | Express L768/L1.5 User Manual |
