Chapter 3: Terminal Menu Operation and Structure

IPX Servers/Hops - Number of routers that must go through to get to server. Ranges from 0-15 or 16 for infinite.

IPX Servers/TTL - Seconds until address is removed from table.

Value of 999 means server is static.

Status/WAN Stats

Read security: 5

This menu contains generic WAN statistics on HDLC hardware port.

HDLC Port

Tx Bytes - total number of raw bytes sent out HDLC port 1 Rx Bytes - total number of raw bytes received in HDLC port 1 Rx CRCs - total number of CRC errors detected on HDLC port 1

Clear Counts - When activated, clears all WAN stat counts

Status/LAN Stats

Read security: 5

This menu contains statistics for the Ethernet port.

Tx Packets - Packets transmitted out the Ethernet port

Rx Packets - Packets received from the Ethernet port

Tx Errors - Total transmit errors encountered on Ethernet port Single Collisions - total single collisions before successful transmission

Multiple Collisions - total multiple collisions before successful transmission

Excessive Collisions - total collisions that resulted in packet being dropped

Deferred Transmissions - total packets deferred due to collisions Carrier Sense Errors - total carrier sense errors encountered (no link integrity)

Rx Errors - Total packets received in error and dropped CRCs - total packets detected with CRC errors

Giants - total packets received that were greater than 1518 bytes Runts - total packets received that were less than 64 bytes

Rx Collisions - total collision occurred during reception

Clear Counts - When activated, clears all LAN Stat counts.

76

Express L768/L1.5 User Manual

61202192L1-1

Page 92
Image 92
ADTRAN L768 user manual Status/WAN Stats, Status/LAN Stats, Hdlc Port