Chapter 3: Terminal Menu Operation and Structure

Route/Force IP

Write security: 3; Read security: 5

When set to Yes, the Express L768/L1.5 will force the PPP peer to use the IP address in the IP/Net for this profile as its WAN IP address. Normally this is set in the No (def) position.

IP/RIP

The RIP parameters can be adjusted from their defaults under this menu.

RIP/Mode

Write security: 3; Read security: 5

The Express L768/L1.5 will perform RIP over the WAN connection when this is set to On (def).

RIP/Protocol

Write security: 3; Read security: 5

The Express L768/L1.5 can perform version 1, V1 (def), or version 2, V2, of RIP on this WAN connection.

RIP/Method

Write security: 3; Read security: 5

Split Horizon - Only routes not learned on the WAN connection are advertised.

Poison Reverse (def) - All routes are advertised, including routes learned from the WAN connection. These routes are poisoned.

None - All routes are advertised, including routes learned from the WAN connection. No attempt is made to poison these routes.

RIP/Direction

Write security: 3; Read security: 5

Tx and Rx (def)- RIP advertisements are transmitted and listened to on the WAN connection.

Tx only - RIP advertisements are transmitted and not listened to.

Rx only - RIP advertisements are listened to but not transmitted.

61202192L1-1

Express L768/L1.5 User Manual

59

Page 75
Image 75
ADTRAN L768 user manual Route/Force IP, RIP/Mode