Appendix A
Loop Status Messages
The Express L768/L1.5 displays current loop status of the HDSL on the bottom center line of the terminal screen. The following messages are defined:
Connected
This is seen when the Express L768/L1.5 HDSL layer 1 is up. The rate is de- termined by what it is configured for under Configuration/WAN/HDSL/Rate.
Echo: Tx: X Rx: Y
The current transmit and receive count for the PPP echo request test.
Layer 1 up
The Express L768/L1.5’s HDSL layer 1 is up.
Link down
The HDSL link is not synchronized.
Link In Sync
The HDSL link is synchronized but layer 1 is not up.
NET EOC LOOPBACK
Express L768/L1.5 has received an HDSL EOC loopback command from the far end.
RINGING
An incoming call is ringing.
Rate Status Messages
Displays the rate at which the connection has been established.
Express L768/L1.5 User Manual | 89 |
