
Glossary
IEEE 802.3
A physical layer standard specifying a linear bus network LAN with a CSMA/ CD access method on a bus topology. Ethernet follows the 802.3 standard, transmitting at 10 megabits per second. This is the most common local area network specification. Physical variations of IEEE 802.3 include 10Base2 and 10BaseT.
in-band signalling
Signalling made up of tones which pass within the voice frequency band and are carried along the same circuit as the talk path being established by the sig- nals. Virtually all signalling (request for service, dialing, disconnect, etc.) in the U.S. is
interexchange carrier
Since divestiture, any carrier registered with the FCC authorized to carry cus- tomer transmissions between LATAs interstate, or if approved by a state pub- lic utility commission, intrastate. Includes carriers such as AT&T Communications, Satellite Business Systems, GTE Telenet, GTE Sprint, and MCI.
information element
The name for the data fields within an ISDN Layer 3 message.
interworking
Communication between two types of networks or end equipment. This may or may not involve a difference in signalling or protocol elements supported.
Internet Protocol
A TCP/IP protocol describing software that tracks the Internet address of nodes, routes outgoing message, and recognizes incoming messages. Used in gateways to connect networks at OSI network Level 3 and above.
IPX
Internetwork Packet Exchange. A Novell NetWare protocol used to move in- formation across networks.
ISDN
Integrated Services Digital Network. A network architecture that enables end-
Interworking with a public switched telephone network is retained.
jabber
An error condition in which a network device continually transmits garbage onto the network. In IEEE 802.3, a data packet whose length exceeds that pre- scribed in the standard.
112 | Express L768/L1.5 User Manual |