Chapter 3. Operation

3.When the desired value is in the data field position, press ENTER to set the value.

The unit is set for the value shown in the data field and the cursor moves back to the submenu item position indicating the operation is complete.

4.Select another submenu field or use the CANCEL key to return to the submenu.

CANCEL is available any time during the operation. If used prior to pressing ENTER after making a data change, the original data value is restored and the cursor returns to the submenu field.

Viewing Display Only Data Fields

An example of a Display Only data field is found by selecting the following menu choices.

1.Select STATUS from the main menu.

2.Select 2)CURR ERR/ALM from the submenu.

LOSS OF SIGNAL INACTIVE/ACTIVE is displayed giving the

current state of the alarm.

To Exit Any Menu Field Operation or Display

Press the CANCEL key as many times as required to return to the desired menu level.

61200060L1-1

TSU User Manual

3-5

Page 41
Image 41
ADTRAN T1-FT1 user manual Viewing Display Only Data Fields, To Exit Any Menu Field Operation or Display