ADTRAN T1-FT1 user manual Four Opening Menu Functions

Chapter 3. Operation

The opening menu is the access point to all other operations. There are four main menu items, 1)STATUS, 2)CONFIGURE, 3)UTILITY, 4)TEST. Each main menu item has several functions and submenus to identify and access specific parameters. In the discussions that follow, each main menu contains a complete menu diagram to identify the location of each operation.

The Four Opening Menu Functions

STATUS

The Status menu provides the ability to view the status of the TSU operation. This menu includes the following sub-items.

NI PERF RPTS

Used to view the user’s set of data on the Network Interface Performance Reports in compliance with ANSI T1.403 and AT&T Document TR54016.

CURR ERR/ALM

Used to view current errors/alarms which are being reported by the TSU.

ERR/ALM HIST

Used to view and clear history errors and alarms.

CONFIG

The Configuration menu is used to set the TSU's operational configuration. This menu includes the following sub-items.

NETWORK (NI)

Used to set all of the parameters associated with the network interface.

UNIT

Used to control TSU’s control port baud rate and to setup the dial out function.

PORT

Used to configure the parameters associated with the V.35 port.

61200060L1-1 TSU User Manual 3-7