Chapter 3. Operation
XMIT PRM
Enables and disables the transmitting of Performance Report Messages (PRM) data on the Facility Data Link (FDL). The PRM data continues to be collected even if XMIT PRM is disabled. (Possible only with ESF Format.)
Choices: ENA, DISA
CLOCK SOURCE
Selects the clock source for transmission toward the network form the NI.
Choices: NETWORK, DTE, INTERNAL
BIT STUFFING
When enabled, Bit Stuffing causes the TSU to monitor for ones (1s) density violations and insert a one (1) when needed to maintain ones at 12.5%.
This option should be disabled if B8ZS is enabled, if Nx56 is selected or alternate channels are being used. All of these other options already ensure pulse density requirements. Choices: ENA, DISA
SET LBO
Selects the Line Build Out for the network interface. In AUTO mode, the TSU will set the LBO based on the strength of the receive signal.
Choices: 0db,
TSU User Manual |
