4.3.2 Tool Bar
Using the Tool Bar buttons is a more intuitive way to implement the functions of ICOM Tools.
Port Select: Selects the port(s) you want to perform test- ing on
Port Setup: Sets up configuration of the port you have selected
Port Close: Closes the port you have selected
Port Run: Runs the port test on the port you have selected
Port Stop: Stops the port test on the port you have selected
All Ports Setup: Sets up the configuration of all ports not running test
All Ports Run: Runs test on all ports
All Ports Stop: Stops test on all ports
Clear Message: Clears messages on Message Logo area and the Rx length information on the Performance Listing area
26 |
