Domain/workgroup configuration
The Domain configuration item can be found on a Windows XP machine as follows:
1.From the start menu, select CONTROL PANEL > SYSTEM > COMPUTER NAME tab.
2.The Domain or Workgroup that this Computer is a member of is displayed in this tab.
3.If the PC is not a member of any Domain or Workgroup then one must be joined. To do this click on the change button and enter the name of the domain (the default for Windows XP is MSHOME).
4.A reboot of the PC may be prompted if the Domain or Workgroup has been changed.
Setting up a new user account (Windows XP)
The
For windows XP this can be set up as follows:
1.From the start menu, select Control Panel > User accounts.
2.From this screen click ‘ Add …’ , and enter the new user name and the Domain/Workgroup setting noted above. Select the type of user (restricted) and then select finish.
3.Select the user just created, select ‘ Reset Password …’ and enter a password for this user.
4.Note the User name and Password.
NOTE:
For Windows Vista: Users have to turn on the Guest account via manage user accounts in the control panel, then add access to either ‘ Everyone’ or ‘ Guest’ on the shared drive. You could create a new account for the internet radio, with a password, if you are concerned about security. The Guest account has no password by default, so Jupiter 6 will connect to it from its factory default settings.
Configuring a shared drive
From the Start menu select My Computer or Windows Explorer and navigate to the directory you wish to share. Right click on the folder and select Sharing and Security. Configure the shared drive as
2.8 Sharing folders on non-Windows computers
It is beyond the scope of this manual to describe how to share folders on all computer systems. Please refer to your operating system documentation to find out how to share folders on
2.9 Setting the radio to work with shared folders
To set up the radio to playback audio stored on
17
