AGFA CL50 manual Recorded, Image is blurry, Image is too, Dark

ePhoto CL50 User’s Guide		49
Problem	Possible Cause/Solution
The recorded	The subject moved while you were taking
image is blurry.	the picture. Hold the camera steady and take
	the picture again.
	You moved the camera while you were tak-
	ing a picture. Take the picture again and hold
	the camera steady as you depress the shutter
	button.
	You used the wrong focus setting. Make
	sure the subject’s distance from the lens and
	the focus setting match. The flash illuminates
	subjects up to a distance of only about 10
	feet (2.6 m).
	You manually set the shutter speed too low.
	Increase the shutter speed manually.
The recorded	There was not enough light. Set the flash to
image is too	the Auto or Fill-in setting.
dark.	The subject was too far away for the flash.
	The flash illuminates subjects up to a dis-
	tance of only about 9 feet (2.8 m).
	You selected an incorrect advanced setting.
	Readjust the setting or set it to automatic.
	You can also use PhotoWise to adjust the
	brightness and contrast of your image.

Troubleshooting