Troubleshooting (cont.)
The built-in flash doesn’t work.
◗The flash may be turned off. Check the flash setting.
◗The batteries may be too weak. Replace them.
The recorded image is blurry.
◗The subject may have moved while you were taking the picture. Hold the camera steady and take the picture again.
◗You may have moved the camera before it beeped, signaling that the image was captured. Take the picture again and hold the camera steady until you hear the beep.
◗You may have used the wrong focus setting. Make sure the subject’s distance from the lens and the focus setting match. The flash illuminates subjects up to a distance of only about 7 feet (2.6 m).
The recorded image is too dark.
◗There may not be enough light. Set the flash to the Auto or
◗The subject may be too far away for the flash. The flash illuminates subjects up to a dis- tance of only about 8.5 feet (2.6 m).
54
