Table A Safety Symbols (continued)

SymbolsDefinition

Standby (supply). Units with this symbol are not completely disconnected from AC mains when this switch is in the standby position. To completely disconnect the unit from AC mains, either disconnect the power cord, or have a qualified/licensed electrician install an external switch.

ON (supply). A switch with this symbol closes the instrument’s power supply circuit, connecting it to the mains supply.

OFF (supply). A switch with this symbol opens the instrument’s power supply circuit, disconnecting it from the mains supply.

Table B Instrument Markings

Marking

Definition

 

 

 

The instruction documentation symbol appears when it is

 

necessary for the user to refer to the instruction in the

 

documentation.

 

 

 

The CE mark is a registered trademark of the European

 

Community.

 

 

 

This product complies with the WEEE Directive (2002/96/EC)

 

marking requirements. The affixed label indicates that you must

 

not discard this electrical/electronic product in domestic

 

household waste. To return unwanted products, contact your

 

local Agilent Technologies office, or see www.agilent.com for

 

more information.

 

 

 

The CSA mark is a registered trademark of the

 

CSA-International.

 

 

N10149

The C-tick mark is a registered trademark of the Spectrum

Management Agency of Australia. This signifies compliance

 

 

with the Australian EMC Framework regulations under the

 

terms of the Radio Communications Act of 1992.

 

 

ISM1-A

This text indicates that the instrument is an Industrial Scientific

 

and Medical Group 1 Class A product (CISPER 11, Clause 4).

 

 

ICES/NMB-001

This text indicates product compliance with the Canadian

 

Interference-Causing Equipment Standard (ICES-001).

 

 

Operator Safety Requirements

The following general safety precautions must be observed during all phases of operation of this system. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates

Installation and User’s Guide

5

Page 4 Page 6
Page 5
Image 5
Agilent Technologies 85225F manual Table B Instrument Markings, Marking Definition
Page 4 Page 6

85225F specifications

Agilent Technologies 85225F is a high-performance microwave signal generator designed for the most demanding test and measurement applications in the RF and microwave frequency domains. This versatile instrument is a vital tool for engineers and technicians who require precise and reliable signal generation in various fields such as telecommunications, aerospace, and electronic warfare.

One of the main features of the Agilent 85225F is its frequency coverage, which spans from 0.1 to 26.5 GHz. This broad frequency range allows users to address a wide array of applications, including component testing, system verification, and radar signal simulation. With exceptional frequency resolution and accuracy, the 85225F ensures the generation of clean and stable signals tailored to specific operational requirements.

The 85225F incorporates advanced phase-locked loop (PLL) technology, which contributes to its superior frequency stability and low phase noise. This technology is crucial for applications requiring precise signal integrity and minimal jitter, such as digital communications and high-frequency circuit testing. The instrument’s low phase noise is particularly advantageous for sensitive measurements and data transmission systems where signal quality is paramount.

In addition to its impressive frequency and phase noise characteristics, the Agilent 85225F features multiple modulation capabilities, including amplitude modulation (AM), frequency modulation (FM), and pulse modulation. These modulation options enable users to simulate a wide variety of real-world signals and testing conditions, enhancing the versatility of the instrument in various testing environments.

The 85225F also offers a user-friendly interface that facilitates ease of operation. The clear LCD screen displays essential parameters and settings, allowing users to make adjustments quickly and efficiently. Furthermore, the instrument supports remote programming and automation through its GPIB or LAN connectivity options, making it suitable for integration into larger test systems.

Another notable characteristic of the Agilent 85225F is its compact design, which does not compromise on performance. This space-saving design makes it ideal for both lab and field applications, allowing engineers to transport the generator with ease, while still maintaining the ruggedness required for demanding environments.

Overall, the Agilent Technologies 85225F stands out as a robust and reliable microwave signal generator, equipped with state-of-the-art features and technologies that cater to the needs of modern RF testing. Its broad frequency coverage, advanced modulation capabilities, low phase noise, and user-friendly interface make it an essential tool for a wide range of applications in the RF and microwave sector.
Top Page Image Contents