Agilent Technologies 85225F To remove or replace a system component, To remove a system component

Servicing the System 4

To remove or replace a system component

Follow these steps to remove a system component for periodic component calibration, service, or repair.

WA R N I N G		These servicing instructions are provided for use by qualified
		personnel only. To avoid electrical shock, do not perform any
		servicing unless you are qualified to do so.
		The opening of covers or removal of parts is likely to expose
WARNING
		dangerous voltages. Disconnect the product from all voltage
		sources before opening covers or removing parts.
To remove a system component
		Step		Note
	1		Turn off all components.
	2		Disconnect the system from line
			power.
	3		Disconnect all cables from the
			instrument to be removed.
	4		Prepare a surface near the rack
			cabinet to place the removed
			system component.
	5		Lower the stabilizing legs on the
			rack cabinet.
	6		From the front of the rack cabinet,
			remove the four screws (2 screws
			on each rack mount) attaching the
			instrument’s rack mount and
			handle kit to the rack cabinet.
	7		As another person steadies the	• Some components may weigh more
			rack cabinet, hold the instrument	than 50 pounds and may require
			by the rack mount handles and	more than one person to remove
			slowly pull forward.	safely.
	8		Save the rack mount screws by
			reinserting them in the rack cabinet
			frame nuts.

Follow the steps in reverse order to replace a system component.

Installation and User’s Guide 105