Agilent Technologies E1364A Recommended Test Equipment, Requirements Recommended Model Use

Recommended Test Equipment

Table 1-1 lists the test equipment recommended for testing, adjusting, and servicing the E1364A Switch Module. Essential requirements for each piece of test equipment are described in the "Requirements" column.

Table 1-1. Recommended Test Equipment

Instrument	Requirements	Recommended Model	Use*
Controller, GP-IB	GP-IB compatibility as defined by	HP 9000 Series 300	F,O,
	IEEE Standard 488-1978 and the	or	P,T
	identical ANSI Standard MC1.1:	IBM compatible PC with HP
	SH1, AH1, T2, TE0, L2, LE0, SR0,	BASIC
	RL0, PP0, DC0, DT0, and C1, 2, 3,
	4, 5.
Mainframe	Compatible with switch	E1300A, E1301A,	F,O,
		E1302A (requires E1306A**)	P,T
		E1400B/T (requires E1405A/B
	Use the E1403B A/B-to-C-size	or E1406B**),
	Adapter to install a B-size module in	E1401B/T (requires E1405A/B
	a C-size E14XX mainframe.	or E1406B**),
		E1421B (requires E1405A/B
		or E1406B**)
		** or an embedded controller or
		VXLink in place of a command
		module.
Digital Multimeter	2-wire ohms (up to 1 GΩ)	3458A	O,P,T
	4-wire ohms	34401A

*F = Functional Verification, O = Operation Verification Tests, P = Performance Verification Tests, T = Troubleshooting

Chapter 1 General Information 17