Agilent Technologies E1364A service manual Close instrument session

iprintf (id, "CLOS (@%u)\n", channel); ipromptf (dm, "TRIG SGL\n", "%t", reading); printf ("\n Channel %u (closed): %s", i, reading);

iprintf (id, "OPEN (@%u)\n", channel); ipromptf (dm, "TRIG SGL\n", "%t", reading); printf ("\n Channel %u (open): %s", i, reading);

}

printf ("\n\nConnect DMM to NC and C lines of E1364A (4-wire connection)");

getchar ();

iprintf (id, "CLOS (@100:115)\n");

printf ("\n\nContact Resistance -- Normally closed contacts\n");

for (i = 0; i <=15; i++)

{

channel = 100 + i;

iprintf (id, "OPEN (@%u)\n", channel); ipromptf (dm, "TRIG SGL\n", "%t", reading); printf ("\n Channel %u (closed): %s", i, reading);

iprintf (id, "CLOS (@%u)\n", channel); ipromptf (dm, "TRIG SGL\n", "%t", reading); printf ("\n Channel %u (open): %s", i, reading);

}

iclose (id);iclose (dm); /* Close instrument session */

}

Appendix A Example C Programs 49