Agilent Technologies E1364A service manual Service

Chapter 4

Service

Introduction

This chapter contains service information for the Agilent E1364A Switch Module, including troubleshooting techniques and repair and maintenance guidelines.

WARNING Do not perform any of the service procedures shown unless you are a qualified, service-trained technician, and have read the WARNINGS and CAUTIONS in Chapter 1.

Equipment Equipment required for switch troubleshooting and repair is listed in

Required Table 1-1, "Recommended Test Equipment." Any equipment that satisfies the requirements given in the table may be substituted. To avoid damage to

the screw head slots, use a T8 Torx driver to remove the front panel handles.

Service Aids See Chapter 3, "Replaceable Parts," or Appendix B, "Backdating Information," for descriptions and locations of E1364A replaceable parts, depending on the serial number of your switch module. Schematic Diagrams are available at the back of this manual. Service notes, manual updates, and service literature for the switch may be available through Agilent. For information, contact your nearest Agilent Technologies Sales and Support Office.

Chapter 4 Service 43