Language Dictionary 71
Table 7-3. Agilent SAS Programming Parameters (in Fixed Mode)
Parameter Agilent E4350B Agilent E4351B
CURR[:LEV] MAX and 8.16 A 4.08 A
CURR[:LEV]:TRIG MAX 8.16 A 4.08 A
CURR:PROT[:LEV]: MAX 10 A 5 A
(Programming range is 0 to MAX)
*RST Current Value 0.096 A 0.048 A
*RST Current Protect Value MAX for both models
OUTP:PROT:DEL
*RST Value 0 to 32.767 s (MAX) both models
200 ms both models
VOLT[:LEV] MAX and 61.50 V 123.0 V
VOLT[:LEV]:TRIG MAX 61.50 V 123.0 V
(Programming range is 0 to MAX)
*RST Voltage Value 0 V for both models
VOLT:PROT MAX 73.0 V 140.0 V
(Programming range is 0 to MAX)
*RST OVP value 73.0 V 140.0 V
Calibration Commands
See appendix B.
Display S ubsyste m
This subsystem controls the state and output of the alphanumeric portion of the display.
DISP
Enables or disa bles the display. When disabled, the display characters are blank. T he annunciators are not affected by this
command.
Command Syntax DISPlay[:WINDow][:STATe] <bool>
Parameters 0 | 1 | OFF | ON
*RST Value ON
Examples DISP ON DISPLAY:STATE ON
Query Syntax DISPlay[:WINDow][STATe]?
Returned Parameters <NR1> 0 or 1
Related Commands DISP:MODE DISP:TEXT *RST
DISP:MODE
Switches the display between its normal metering mode and a mode in which it displays text sent by the user.
Command Syntax DISPlay[:WINDow]:MODE <CRD>
Parameters NORMal | TEXT
*RST Value NORM
Examples DISP:MODE NORM DISPLAY:MODE NORMAL
Query Syntax DISPlay[:WINDow]:MO DE?
Returned Parameters <CRD> NORMAL or TEXT
Related Commands DISP DISP:TEXT *RST