Installation and Setup
NOTE
WARNING
Installation and Setup
Power Requirements
Battery Information
The analyzer uses a Lithium Polycarbon Monofloride battery to power the analyzer clock. The battery is located on the CPU board.
You can order the service documentation for Agilent spectrum analyzers through your Agilent Sales and Service office. The documentation is described under “Options” on page 65.
If the analyzer’s clock does not keep time when powered off, the problem is the battery. See “Returning an Analyzer for Service” on page 81.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended. Discard used batteries according to the manufacturer’s instructions.
12 | Chapter 1 |