Figure 4-4 Viewing Traces 1, 2, and 3
Viewing Catalogs and Saving Files
Saving a File
Viewing Catalogs and Saving Files
Step 2. Save the file
1.To access the Save menu, press, File, Save.
2.Select the type of file you want to save. In this example you are saving a trace; press Type, Trace.
NOTE | Trace files are not bitmap files. Files saved as Trace cannot be imported |
| into other applications or converted. If you require the use of other |
| applications, for example Microsoft→ Word or Microsoft→ Excel, be |
| sure to save your files as .gif or .wmf formats using Screen for your |
| file Type. Comma separated value (csv) files can also be imported |
| into Microsoft→ Excel. |
| 3. Select the trace you wish to save (1, 2, 3, or all traces). In this |
| example you will save trace 3; press Source (softkey), Trace 3. |
| 4. Select the format you wish to use for saving the trace, either trace |
| plus state (Trace + State) or comma separated value (CSV). In this |
| example you will save as trace plus state; press Format, Trace + State. |
| 5. Enter a filename by pressing Name. The Alpha Editor appears. For |
| this example you will name the file, “TEST1”. (The numeric keypad |
| is also available for the filename.) Note that the file extension is |
| always set by the system and for this file type the extension is TRC. |
| You must now press the Enter (hardkey) to get back to the Save |
| menu. |
Chapter 4 | 55 |
