Agilent Technologies E4440A manual Options and Accessories, Chapter, Name, Description, Number

			Options and Accessories
			Options
		Options
Option		Name	Description
Number
	Manual Set on CD-ROM		The documentation CD-ROM contains the standard
0B0			documentation set as well as Adobe Acrobat Reader with
	Only
			Search.
				Options
	Additional Manual Set		An additional set of the standard documentation shipped with
0B1			the analyzer. See “Initial Inspection” on page 7 for information
			about the standard documentation set.
				and
	Service Documentation		The Service guide describes assembly-level troubleshooting
0BW	Front Handle Kit		procedures, provides a parts list, and documents post-repair	Accessories
1CN			Available as P/N 5063-9228.
			procedures.
1CM	Rack Mount Kit		Includes rack mount flanges and hardware. Used to rack mount
			analyzers without front handles (available as P/N 5063-9215).
	Rack Mount Kit with		Includes the parts necessary to rack mount an analyzer with
1CP	Handles		front handles attached (available as P/N 5063-9222). (Includes
			handles.)
1CR	Rack Slide Kit		Available as P/N E4406-60115. Rack slides allow the analyzer
			to be pulled out while the analyzer is secured to the rack.
	Preamplifier		An internal preamplifier assembly. Not required when Option
1DS			110 is installed.
			Frequency Range: 100 kHz to 3 GHz
015	6 GHz Measurement		Includes accessories necessary to set up return loss and
	Accessory Kit		loss/gain measurements. Used with Option 215.
	Audio Input, 100 kΩ		Audio signal analysis capability that works with the Option 233
107			Measuring Receiver System. Available in all models. Option
			107 cannot be installed if Option 122 or 140 is installed.
			Requires Option 233.
	RF/µW Internal		An internal preamplifier assembly that covers all frequency
110	Preamplifier		bands. Available in all models. Option 110 cannot be installed if
			Option 1DS is installed.
			Frequency Range: 100 kHz to 50 GHz
111	USB Device Side I/O		Provides a rear-panel USB interface connector (device side I/O
	Interface		only).
	512 Mb User Memory		Provides additional memory to accommodate a greater number
115			of applications. Available in all models. Option 115 cannot be
			installed if Option 117 is installed.

Chapter 5 65