Agilent Technologies E4440A manual Copying a File, 8Copy Menu

Viewing Catalogs and Saving Files

Viewing Catalogs and Saving Files

Saving a File

Copying a File

1.To access the Copy menu, press File, Copy. This menu function brings up 2 directory boxes as described by the From: and To: fields located directly above the boxes. Refer to Figure 4-9.

Figure 4-8 Copy Menu

	2.	Put a formatted floppy in the A: drive.
	3.	Select the type of file you want to copy (setup, state, trace, limits,
		screens, or corrections). In this example you are copying a trace file
		from the C: drive to the A: drive; press, Type, Trace.
	4.	Press Dir (in the key menu) to underline From:. Notice the From:
		field (just above the top directory box) highlights the location from
		which you will be copying. Using the navigation keys (Dir Up, Direct
		select, step keys, or front panel knob), locate the C:\START\
		directory.
	5.	Scroll to highlight the file displayed in the directory box from which
		you wish to copy. In this example, you will need to highlight the file
		RENAME.
	6.	Press Dir (in the key menu) to underline To:. The To: field (just
		above the bottom directory box) is highlighting the location to which
		you will be copying. Using the navigation keys as described above,
		highlight the A:\ drive.
	When pressing Dir (To), the file chosen in the From: location is no longer
NOTE
		highlighted, however the Name: field above the From directory box

60 Chapter 4