WARNING
CAUTION
NOTE
NOTE
Information Screen
NOTE
Installation and Setup
Turning on the Analyzer for the First Time
Turning on the Analyzer for the First Time
❏Plug in the power cord.
If this product is to be energized via an external auto transformer for voltage reduction, make sure that its common terminal is connected to a neutral (earthed pole) of the power supply.
The analyzer is shipped with a a transportation disk inserted in the disk drive to prevent damage to the disk drive during transportation. This transportation disk, or a blank floppy disk, should be inserted in the disk drive whenever transporting the analyzer.
Do not leave a disk in the
Do not connect anything else to the analyzer yet.
❏Press the power switch (located in the lower
The instrument requires >2 minutes to
An information screen appears during the initialization process. The information screen contains the analyzer product number and a URL for accessing product support information on the World Wide Web. See “Additional Information” on page 2.
The information screen displays for approximately 10 seconds before the initialization process is complete.
Record the firmware revision and serial number, and keep it for reference. If you should ever need to call Agilent Technologies for service or with any questions regarding your analyzer, it will be helpful to have this information readily available. You can also obtain the firmware revision and serial number by pressing System, More, Show System.
Installation and Setup
Chapter 1 | 13 |