Agilent Technologies N5980A manual SOUR2PATTEADDRATE, Syntax SOUR2PATTEADD Once

Programming Reference

Error Insertion

The error insertion is capable to enforce a given error ratio, and to add single errors into the data stream. Both are available in parallel.

Insertion Rate

:SOUR2:PATT:EADD:RATE

Syntax :SOUR2:PATT:EADD:RATE? :SOUR2:PATT:EADD:RATE NR3

Description Either sets or gets the error insertion rate. Only the listed error rates are available. If another value is specified while sending the command, the error rate will be rounded to the next available value.

Available Insertion
Rate
	Inserted error rate	Parameter
	None	0
	1e-3	1e-3
	1e-4	1e-4
	1e-5	1e-5
	1e-6	1e-6
	1e-7	1e-7
	1e-8	1e-8
	1e-9	1e-9

Add Single Error

:SOUR2:PATT:EADD ONCE

Syntax :SOUR2:PATT:EADD ONCE

Description Adds a single error to the generated data stream. This is available even if the cyclic error insertion is active.

N5980A User Guide 37