Agilent Technologies SMPTE 310M manual Remove optional interface

MPEGscope Portable and Portable Lite

Step 2: Remove optional interface

Complete this step if your MPEGscope already has an optional interface installed and you want to replace it with the SMPTE 310M interface.

IMPORTANT: 1 Attach the antistatic wrist strap to your wrist and to the PC chassis as described in the

instructions on the envelope. Ensure that the copper foil end of this strap attaches to an electrical ground.

5If your optional line interface is connected to the MPEGscope main card with a cable, disconnect the other end of the cable from the MPEGscope main card and remove the cable.

3If your optional line interface is connected to the MPEGscope main card with a cable, disconnect the cable from the optional interface card.

4Remove the faceplate screw from slot 2 with the screwdriver provided, then remove the optional line interface.

2If your MPEGscope has a Real-time Analyzer, disconnect the ribbon cable connector from the Real-time Analyzer card. The cable runs from the MPEGscope main card to the Real-time Analyzer card.

15