MPEGscope Plus and MPEGscope Lite

Step 2: Remove optional interface

Complete this step if your MPEGscope already has an optional interface installed and you want to replace it with the SMPTE 310M interface. For an alternative card configuration, refer to page 9.

IMPORTANT:

1Attach the antistatic wrist strap to your wrist and to the PC chassis as described in the instructions on the envelope. Ensure that the copper foil end of this strap attaches to an electrical ground.

Back of computer with connectors and faceplates

2 Lay the computer on its side so that you can access the cards from the top.

6

Page 14
Image 14
Agilent Technologies SMPTE 310M manual Remove optional interface