Agilent Technologies SMPTE 310M manual

3If your MPEGscope has a Real-time Analyzer, reconnect the ribbon cable from the MPEGscope main card to the Real-time Analyzer card.

Image 25

Agilent Technologies SMPTE 310M manual

Contents

Smpte 310M Interface Installation Guide Manual Name Copyright Warranty MPEGscope+61-3-8877-8633 Indicates that antistatic precautions should be taken Safety SymbolsCertification Additional Information for Test and Measurement Equipment Avertissement Symboles de sécurité Iii Cet instrument est conforme auxPage Contents-1 ContentsPage Interface Printed Circuit Assembly E6292-66501 Interface Installation Guide E6292-94000Introduction Introduction Location Number MPEGscope Plus and MPEGscope Lite MPEGscope Plus and MPEGscope Lite Remove the cover MPEGscope Plus and MPEGscope Lite Remove optional interface MPEGscope Plus and MPEGscope Lite Install Smpte interface Remove the blank faceplate Install the Real-timeAnalyzer card into slot Into slot Replace the cover Smpte 310M interface installed in slot MPEGscope Portable and Portable Lite MPEGscope Portable and Portable Lite Remove the cover Tabs Remove optional interface Install Smpte interface Page Guide Plastic guide for Smpte 310M interface installed in slot Connecting to the Smpte 310M interface Connecting to the Smpte 310M interfaceDVB-SPI Tx To system under test Connect the Scsi Configuring the software Configuring the softwarePage Select the Tx tab Configuring the software Select the Rx tabClose the dialog Between consecutive packets Smpte 310M interface specificationsCables on all interfaces Release Notes Release Notes