MPEGscope Portable and Portable Lite
Step 4: Replace the cover
screw |
#1 |
3Place the back cover in position and replace the six back panel screws.
4Reconnect your display, power cables, and LAN connection, then power on your MPEGscope Portable.
screw |
#2 |
tabs |
screw |
#1 |
screw |
#4 |
1Insert tabs on the sides of the metal shield into the slots on the outer frame, then replace the two metal shield screws.
2 | A plastic guide for the | |
| MPEGscope main card is | |
| located on the inside of the | |
| metal shield (by the third | |
| plastic guide screw). Use a | |
| small screwdriver to push | |
tabs | down the plastic guide until the | |
edge of the MPEGscope main | ||
| ||
| card is engaged in the slot on | |
| the guide. |
screw |
#3 |
screw |
#2 |
screw | screw |
#5 | #6 |
18
