Agilent Technologies SMPTE 310M manual Connecting to the Smpte 310M interface, DVB-SPI Tx

Connecting to the SMPTE 310M interface

Connecting to the SMPTE 310M interface

DVB–SPI interface on MPEGscope main board

DVB–SPI Tx EXT CLK IN DVB–SPI Rx

1Connect the SCSI 26-pin male connector labelled SPI Tx on the DVB–SPI Y–Adapter cable to the DVB-SPI Tx port on the MPEGscope main board.

4Connect the output line to your system under test to the OUT port on the SMPTE 310 interface.

SMPTE 310M interface SMPTE310M OUT

To system under test...

2 Connect the SCSI

26-pin male connector labelled SPI Rx on the DVB– SPI Y–Adapter cable to the DVB-SPI Rx port on the MPEGscope main board

3 Connect the single SCSI

50-pin connector on the DVB-SPI Y-Adapter cable to the DVB-SPI IN/OUT port on the SMPTE 310M interface.

IN	E6292A
	DVB–SPI IN/OUT

5Connect the input line from your system under test to the IN port on the SMPTE 310M interface.

20