2 Features and Functions
Output Configuration
Introduction
This section contains the information to help you configure the U2761A for outputting waveforms. You may not need to change some of the parameters discussed here, but they are provided so that you will have accessibility when needed.
Output Function
The U2761A can output five standard waveforms (Sine, Square, Ramp, Triangle, and Pulse), and DC. You can select one of the three
The table below shows which output functions are allowed with modulation and sweep. Each “V” indicates a valid combination. If you change to a function that is not applicable for modulation, or sweep; then the modulation or mode will be disabled.
Table 2-1 Output functions
| Sine | Square | Ramp | Triangle | Pulse | DC | Arbitrary |
|
|
|
|
|
|
|
|
AM, FM, PM, FSK, PSK, ASK Carrier | V | V | V | V |
|
| V |
|
|
|
|
|
|
|
|
AM, FM, PM Internal Modulation | V | V | V | V |
|
| V |
|
|
|
|
|
|
|
|
FSK, PSK, ASK Internal Modulation |
| V |
|
|
|
|
|
|
|
|
|
|
|
|
|
Sweep Mode | V | V | V | V |
|
| V |
|
|
|
|
|
|
|
|
26 | U2761A User’s Guide |